Description
Place it anywhere
The Philips Hue Dimmer switch can be used as a normal wall switch. You can place it anywhere you want, using screws or the adhesive tape on the back plate of the switch.
No wires – battery-powered
The Philips Hue dimmer switch is battery-powered, so there is no installation required.
Dimmer Switch – Gen 2 |
---|
Connect up to 12 Philips Hue dimmer switches to your Hue Bridge |
CR2450 battery included |
Battery lifetime minimal 3 years |
Wireless protocol: Zigbee Light Link (ZLL), IEEE 802.15.4 |
Frequency band: 2.4GHz (2400 – 2483.5 MHz) |
Signal range: At least 39.3 ft, depending on local circumstances |
Weight remote: 1.3 oz |
Weight remote including wall plate: 2.4 oz |
Dimensions wall plate: H:4.5in W:2.76in D:0.55 inch |
Remote size: H:3.6in W:1.38 in D:0.43 inch |
50.000 click lifetime |
Software upgradable when connected to the Philips Hue bridge |
Environmental |
---|
Temperature (operation): 23 – 104°F |
Relative humidity: 5…95% non-condensing |